当グループではLHD計測データ収集系（LABCOMシステム）の運転と、同実験関係者・共同研究者の計測データ収集・データ利用・遠隔実験等を支援する以下のサービスを行っています。詳細は各項目をクリックしてください。
| IMAQ Ver3 Error Codes | ||||
| Error Code | Status Name | Description | ||
| -1074397183 | IMG_ERR_NCAP | NI-IMAQ cannot perform the requested operation. | ||
| -1074397182 | IMG_ERR_OVRN | Too many interfaces open. | ||
| -1074397181 | IMG_ERR_EMEM | Not enough memory to perform the operation. | ||
| -1074397180 | IMG_ERR_OSER | Operating system error occurred. | ||
| -1074397179 | IMG_ERR_PAR1 | Function-specific; see function description. | ||
| -1074397178 | IMG_ERR_PAR2 | Function-specific; see function description. | ||
| -1074397177 | IMG_ERR_PAR3 | Function-specific; see function description. | ||
| -1074397176 | IMG_ERR_PAR4 | Function-specific; see function description. | ||
| -1074397175 | IMG_ERR_PAR5 | Function-specific; see function description. | ||
| -1074397174 | IMG_ERR_PAR6 | Function-specific; see function description. | ||
| -1074397173 | IMG_ERR_PAR7 | Function-specific; see function description. | ||
| -1074397172 | IMG_ERR_MXBF | Too many buffers already allocated. | ||
| -1074397171 | IMG_ERR_DLLE | DLL internal error; bad logic state. | ||
| -1074397170 | IMG_ERR_BSIZ | Buffer size used is too small for minimum acquisition frame. | ||
| -1074397169 | IMG_ERR_MXBI | Exhausted buffer IDs. | ||
| -1074397168 | IMG_ERR_ELCK | Operating system unable to lock the requested amount of memory. | ||
| -1074397167 | IMG_ERR_DISE | Error releasing the image buffer. | ||
| -1074397166 | IMG_ERR_BBUF | Bad buffer pointer in list. | ||
| -1074397165 | IMG_ERR_NLCK | Buffer list is not locked for this acquisition. | ||
| -1074397164 | IMG_ERR_NCAM | No camera defined for this channel. | ||
| -1074397163 | IMG_ERR_BINT | The passed in interface or session is invalid. | ||
| -1074397162 | IMG_ERR_BROW | The bytes per row value is less than region of interest. | ||
| -1074397161 | IMG_ERR_BROI | Region of interest is larger than the acquisition area. | ||
| -1074397160 | IMG_ERR_BCMF | Camera file is missing or corrupted. | ||
| -1074397159 | IMG_ERR_NVBL | The hardware is incapable of performing the requested action. | ||
| -1074397158 | IMG_ERR_NCFG | No buffers configured for session. | ||
| -1074397157 | IMG_ERR_BBLF | Buffer list does not contain a valid final command. | ||
| -1074397156 | IMG_ERR_BBLE | Buffer list contains an invalid command. | ||
| -1074397155 | IMG_ERR_BBLB | One or more of the buffers in the buffer list is not configured. | ||
| -1074397154 | IMG_ERR_NAIP | No acquisition in progress. | ||
| -1074397153 | IMG_ERR_VLCK | Cannot detect recognizable video source. | ||
| -1074397152 | IMG_ERR_BDMA | Bad DMA transfer. | ||
| -1074397151 | IMG_ERR_AIOP | Cannot perform request; acquisition currently in progress. | ||
| -1074397150 | IMG_ERR_TIMO | Did not receive all expected video data within the timeout period. | ||
| -1074397149 | IMG_ERR_NBUF | No buffers available; too early in acquisition. | ||
| -1074397148 | IMG_ERR_ZBUF | The buffer has a size of zero. | ||
| -1074397147 | IMG_ERR_HLPR | Parameter value set lower than valid range. | ||
| -1074397146 | IMG_ERR_BTRG | Trigger loopback problem; cannot drive with action enabled. | ||
| -1074397145 | IMG_ERR_NINF | No interface found. | ||
| -1074397144 | IMG_ERR_NDLL | Unable to load DLL. | ||
| -1074397143 | IMG_ERR_NFNC | Unable to find API function in DLL. | ||
| -1074397142 | IMG_ERR_NOSR | Unable to allocate system resources. | ||
| -1074397141 | IMG_ERR_BTAC | No trigger action; acquisition will time out. | ||
| -1074397140 | IMG_ERR_FIFO | FIFO overflow caused acquisition to halt. | ||
| -1074397139 | IMG_ERR_MLCK | Operating system denied request to lock down memory. | ||
| -1074397138 | IMG_ERR_ILCK | Interface locked. | ||
| -1074397137 | IMG_ERR_NEPK | No pixel clock detected from camera. | ||
| -1074397136 | IMG_ERR_SCLM | Field scaling mode not supported. | ||
| -1074397135 | IMG_ERR_SCC1 | Channel not set to 1 when using StillColor RGB acquisition. | ||
| -1074397134 | IMG_ERR_SMALLALLOC | Error during small buffer allocation. | ||
| -1074397133 | IMG_ERR_ALLOC | Error during large buffer allocation. | ||
| -1074397132 | IMG_ERR_BADCAMTYPE | This camera type is not supported by this hardware. | ||
| -1074397131 | IMG_ERR_BADPIXTYPE | Camera not supported; must be an 8-bit camera. | ||
| -1074397130 | IMG_ERR_BADCAMPARAM | Bad camera parameter in configuration file. | ||
| -1074397129 | IMG_ERR_PALKEYDTCT | Unable to recognize color component in PAL signal. | ||
| -1074397128 | IMG_ERR_BFRQ | Bad clock frequency. | ||
| -1074397127 | IMG_ERR_BITP | Bad interface type. | ||
| -1074397126 | IMG_ERR_HWNC | Hardware not capable of supporting this operation. | ||
| -1074397125 | IMG_ERR_SERIAL | Serial port error. | ||
| -1074397124 | IMG_ERR_MXPI | No more pulse IDs are available. Dispose of an existing pulse first. | ||
| -1074397123 | IMG_ERR_BPID | Bad pulse ID. | ||
| -1074397122 | IMG_ERR_NEVR | DLL internal error; bad logic state. | ||
| -1074397121 | IMG_ERR_SERIAL_TIMO | Unable to perform the requested serial operation within the timeout period. | ||
| -1074397120 | IMG_ERR_PG_TOO_MANY | Too many pattern generation transitions defined. | ||
| -1074397119 | IMG_ERR_PG_BAD_TRANS | Bad pattern generation transition time. | ||
| -1074397118 | IMG_ERR_PLNS | Pulse not started. | ||
| -1074397117 | IMG_ERR_BPMD | Bad pulse mode. | ||
| -1074397116 | IMG_ERR_NSAT | This attribute cannot be set. | ||
| -1074397115 | IMG_ERR_HYBRID | Cannot mix system and onboard memory buffers. | ||
| -1074397114 | IMG_ERR_BADFILFMT | Pixel depth not supported with this file format. | ||
| -1074397113 | IMG_ERR_BADFILEXT | File extension is not supported. | ||
| -1074397112 | IMG_ERR_NRTSI | Too many RTSI triggers mapped; you can use only four RTSI lines at once. | ||
| -1074397111 | IMG_ERR_MXTRG | Exhausted trigger resources. | ||
| -1074397110 | IMG_ERR_MXRC | Exhausted resources. | ||
| -1074397109 | IMG_ERR_OOR | Parameter out of range. | ||
| -1074397108 | IMG_ERR_NPROG | FPGA not programmed. | ||
| -1074397107 | IMG_ERR_NEOM | Not enough onboard memory to perform the operation. | ||
| -1074397106 | IMG_ERR_BDTYPE | Bad display type; buffer cannot be displayed with imgPlot. | ||
| -1074397105 | IMG_ERR_THRDACCDEN | Thread denied access to function. | ||
| -1074397104 | IMG_ERR_BADFILWRT | Could not write the file. | ||
| -1074397103 | IMG_ERR_AEXM | This buffer is currently protected. Release it to allow new data to be written. | ||
| -1074397102 | IMG_ERR_BAD_LUT_TYPE | The LUT type is invalid. | ||
| -1074397101 | IMG_ERR_ATTRIBUTE_NOT_READABLE | The selected attribute is not readable. | ||
| -1074397100 | IMG_ERR_BOARD_NOT_SUPPORTED | This version of NI-IMAQ does not support this device. | ||
| -1074397099 | IMG_ERR_BAD_FRAME_FIELD | The value of IMG_ATTR_FRAME_FIELD is invalid. | ||
| -1074397098 | IMG_ERR_INVALID_ATTRIBUTE | The requested attribute is invalid. | ||
| -1074397097 | IMG_ERR_BAD_LINE_MAP | The physical data lines are incorrectly mapped to bit values. | ||
| -1074397095 | IMG_ERR_BAD_CHANNEL | The requested channel is invalid for this device. | ||
| -1074397094 | IMG_ERR_BAD_CHROMA_FILTER | The value of IMG_ATTR_CHROMA_FILTER is invalid. | ||
| -1074397093 | IMG_ERR_BAD_SCALE | The value of IMG_ATTR_HSCALE or IMG_ATTR_VSCALE is invalid. | ||
| -1074397091 | IMG_ERR_BAD_TRIGGER_MODE | The requested triggering mode is invalid. | ||
| -1074397090 | IMG_ERR_BAD_CLAMP_START | The clamp start value is invalid. | ||
| -1074397089 | IMG_ERR_BAD_CLAMP_STOP | The requested clamp stop value is invalid. | ||
| -1074397088 | IMG_ERR_BAD_BRIGHTNESS | The requested brightness level is out of range. | ||
| -1074397087 | IMG_ERR_BAD_CONTRAST | The requested contrast level is out of range. | ||
| -1074397086 | IMG_ERR_BAD_SATURATION | The requested saturation level is out of range. | ||
| -1074397085 | IMG_ERR_BAD_TINT | The requested tint level is out of range. | ||
| -1074397084 | IMG_ERR_BAD_HUE_OFF_ANGLE | The requested hue offset angle is out of range. | ||
| -1074397083 | IMG_ERR_BAD_ACQUIRE_FIELD | The field requested to be acquired is invalid. | ||
| -1074397082 | IMG_ERR_BAD_LUMA_BANDWIDTH | The requested luma bandwidth value is invalid. | ||
| -1074397081 | IMG_ERR_BAD_LUMA_COMB | The requested luma comb setting is invalid. | ||
| -1074397080 | IMG_ERR_BAD_CHROMA_PROCESS | The requested chroma processing value is invalid. | ||
| -1074397079 | IMG_ERR_BAD_CHROMA_BANDWIDTH | The requested chroma bandwidth value is invalid. | ||
| -1074397078 | IMG_ERR_BAD_CHROMA_COMB | The requested chroma comb setting value is invalid. | ||
| -1074397077 | IMG_ERR_BAD_RGB_CORING | The requested minimum level of saturation (coring) for the RGB color space is invalid. | ||
| -1074397076 | IMG_ERR_BAD_HUE_REPLACE_VALUE | The requested HSL hue replacement value is out of range. | ||
| -1074397075 | IMG_ERR_BAD_RED_GAIN | The requested red gain value is out of range. | ||
| -1074397074 | IMG_ERR_BAD_GREEN_GAIN | The requested green gain value is out of range. | ||
| -1074397073 | IMG_ERR_BAD_BLUE_GAIN | The requested blue gain value is out of range. | ||
| -1074397072 | IMG_ERR_BAD_START_FIELD | The requested start field value is invalid. | ||
| -1074397071 | IMG_ERR_BAD_TAP_DIRECTION | The direction of the tap scan is invalid. | ||
| -1074397070 | IMG_ERR_BAD_MAX_IMAGE_RECT | The maximum image rectangle value is invalid because either the top or left offset value is set to a non-zero value. | ||
| -1074397069 | IMG_ERR_BAD_TAP_TYPE | The tap configuration is invalid. | ||
| -1074397068 | IMG_ERR_BAD_SYNC_RECT | The synchronization rectangle is invalid. | ||
| -1074397067 | IMG_ERR_BAD_ACQWINDOW_RECT | The requested acquisition window is invalid. | ||
| -1074397066 | IMG_ERR_BAD_HSL_CORING | The requested minimum level of saturation (coring) for the HSL color space is out of range. | ||
| -1074397065 | IMG_ERR_BAD_TAP_0_VALID_RECT | The rectangle defined for Tap 0 is invalid. | ||
| -1074397064 | IMG_ERR_BAD_TAP_1_VALID_RECT | The rectangle defined for Tap 1 is invalid. | ||
| -1074397063 | IMG_ERR_BAD_TAP_2_VALID_RECT | The rectangle defined for Tap 2 is invalid. | ||
| -1074397062 | IMG_ERR_BAD_TAP_3_VALID_RECT | The rectangle defined for Tap 3 is invalid. | ||
| -1074397061 | IMG_ERR_BAD_TAP_RECT | The tap rectangle is invalid. | ||
| -1074397060 | IMG_ERR_BAD_NUM_TAPS | The number of taps is invalid. | ||
| -1074397059 | IMG_ERR_BAD_TAP_NUM | The tap number is invalid. | ||
| -1074397058 | IMG_ERR_BAD_QUAD_NUM | The scarab quadrant number is invalid. | ||
| -1074397057 | IMG_ERR_BAD_NUM_DATA_LINES | The number of data lines requested is invalid for this IMAQ device. | ||
| -1074397056 | IMG_ERR_BAD_BITS_PER_COMPONENT | The bits-per-component value is invalid. | ||
| -1074397055 | IMG_ERR_BAD_NUM_COMPONENTS | The number of components value is invalid. | ||
| -1074397054 | IMG_ERR_BAD_BIN_THRESHOLD_LOW | The requested lower binary threshold value is out of range. | ||
| -1074397053 | IMG_ERR_BAD_BIN_THRESHOLD_HIGH | The requested upper binary threshold value is out of range. | ||
| -1074397052 | IMG_ERR_BAD_BLACK_REF_VOLT | The requested black reference voltage value is out of range. | ||
| -1074397051 | IMG_ERR_BAD_WHITE_REF_VOLT | The requested white reference voltage value is out of range. | ||
| -1074397050 | IMG_ERR_BAD_FREQ_STD | The video standard frequency value selected for the 6431 chip is invalid. | ||
| -1074397049 | IMG_ERR_BAD_HDELAY | The HDELAY value is out of range. | ||
| -1074397048 | IMG_ERR_BAD_LOCK_SPEED | The setting for lock speed is invalid. | ||
| -1074397047 | IMG_ERR_BAD_BUFFER_LIST | The buffer list is invalid. | ||
| -1074397046 | IMG_ERR_BOARD_NOT_INITIALIZED | The IMAQ device is not yet initialized. | ||
| -1074397045 | IMG_ERR_BAD_PCLK_SOURCE | The requested pixel clock source is invalid for this IMAQ device. | ||
| -1074397044 | IMG_ERR_BAD_VIDEO_LOCK_CHANNEL | The selected video timing signal source is invalid for this IMAQ device. | ||
| -1074397043 | IMG_ERR_BAD_LOCK_SEL | The selected lock mode is invalid. | ||
| -1074397042 | IMG_ERR_BAD_BAUD_RATE | The selected baud rate is invalid for this IMAQ device. | ||
| -1074397041 | IMG_ERR_BAD_STOP_BITS | The requested serial stop bits setting is invalid for this IMAQ device. | ||
| -1074397040 | IMG_ERR_BAD_DATA_BITS | The requested serial data bits setting is invalid for this IMAQ device. | ||
| -1074397039 | IMG_ERR_BAD_PARITY | The requested serial parity setting is invalid for this IMAQ device. | ||
| -1074397038 | IMG_ERR_TERM_STRING_NOT_FOUND | The requested serial termination string was not found in the returned buffer. | ||
| -1074397037 | IMG_ERR_SERIAL_READ_TIMEOUT | The serial read did not complete within the specified timeout period. | ||
| -1074397036 | IMG_ERR_SERIAL_WRITE_TIMEOUT | The serial write operation could not execute within the specified timeout period. | ||
| -1074397035 | IMG_ERR_BAD_SYNCHRONICITY | The async setting in imgSessionAcquire is invalid. | ||
| -1074397034 | IMG_ERR_BAD_INTERLACING_CONFIG | This tap configuration cannot be interlaced. | ||
| -1074397032 | IMG_ERR_BAD_CHIP_CODE | The requested chip code is invalid. Could not find a matching chip. | ||
| -1074397031 | IMG_ERR_LUT_NOT_PRESENT | The LUT chip does not exist on this IMAQ device. | ||
| -1074397030 | IMG_ERR_DSPFILTER_NOT_PRESENT | The DSP filter does not exist on this IMAQ device. | ||
| -1074397029 | IMG_ERR_DEVICE_NOT_FOUND | The IMAQ device was not found. | ||
| -1074397028 | IMG_ERR_ONBOARD_MEM_CONFIG | An error occurred during onboard memory configuration. | ||
| -1074397027 | IMG_ERR_BAD_POINTER | The pointer provided is either NULL when it should not be, or is non-NULL when it should be NULL. | ||
| -1074397026 | IMG_ERR_BAD_BUFFER_LIST_INDEX | The requested buffer list index is invalid. | ||
| -1074397025 | IMG_ERR_INVALID_BUFFER_ATTRIBUTE | The requested buffer attribute is invalid. | ||
| -1074397024 | IMG_ERR_INVALID_BUFFER_PTR | The requested buffer was not created by the NI-IMAQ driver software. | ||
| -1074397023 | IMG_ERR_BUFFER_LIST_ALREADY_LOCKED | This IMAQ device already has a buffer list locked down in memory. | ||
| -1074397022 | IMG_ERR_BAD_DEVICE_TYPE | The type of IMAQ device requested is invalid. | ||
| -1074397021 | IMG_ERR_BAD_BAR_SIZE | The size of one or more Base Address Register windows is incorrect. | ||
| -1074397019 | IMG_ERR_NO_VALID_COUNTER_RECT | The selected region of interest is not valid for the camera tap configuration. | ||
| -1074397018 | IMG_ERR_ACQ_STOPPED | The wait terminated because the acquisition stopped. | ||
| -1074397017 | IMG_ERR_BAD_TRIGGER_ACTION | The requested trigger action is invalid. | ||
| -1074397016 | IMG_ERR_BAD_TRIGGER_POLARITY | The trigger polarity is invalid. | ||
| -1074397015 | IMG_ERR_BAD_TRIGGER_NUMBER | The requested trigger line is invalid. Please verify that this trigger line exists and is properly connected to your device. | ||
| -1074397014 | IMG_ERR_BUFFER_NOT_AVAILABLE | The requested buffer has been overwritten and is no longer available. | ||
| -1074397012 | IMG_ERR_BAD_PULSE_ID | The pulse ID is invalid. | ||
| -1074397011 | IMG_ERR_BAD_PULSE_TIMEBASE | The requested timebase for the pulse is invalid. | ||
| -1074397010 | IMG_ERR_BAD_PULSE_GATE | The gate signal for the pulse is invalid. | ||
| -1074397009 | IMG_ERR_BAD_PULSE_GATE_POLARITY | The polarity of the pulse gate signal is invalid. | ||
| -1074397008 | IMG_ERR_BAD_PULSE_OUTPUT | The output signal for the pulse is invalid. | ||
| -1074397007 | IMG_ERR_BAD_PULSE_OUTPUT_POLARITY | The requested polarity of the pulse output signal is invalid. | ||
| -1074397006 | IMG_ERR_BAD_PULSE_MODE | The requested pulse mode is invalid. | ||
| -1074397005 | IMG_ERR_NOT_ENOUGH_RESOURCES | There are not enough system resources to complete the requested option. | ||
| -1074397004 | IMG_ERR_INVALID_RESOURCE | The requested resource is invalid. | ||
| -1074397003 | IMG_ERR_BAD_FVAL_ENABLE | The selected FVAL enable mode is invalid. | ||
| -1074397002 | IMG_ERR_BAD_WRITE_ENABLE_MODE | The specified combination of enable lines is invalid. | ||
| -1074397001 | IMG_ERR_COMPONENT_MISMATCH | Internal Error: The installed components of the NI-IMAQ driver software are incompatible. Reinstall NI-IMAQ. | ||
| -1074397000 | IMG_ERR_FPGA_PROGRAMMING_FAILED | Internal Error: The attempt to download the program to an FPGA was unsuccessful. | ||
| -1074396999 | IMG_ERR_CONTROL_FPGA_FAILED | Internal Error: The control FPGA did not initialize properly. | ||
| -1074396998 | IMG_ERR_CHIP_NOT_READABLE | Internal Error: Attempted to read a write-only chip. | ||
| -1074396997 | IMG_ERR_CHIP_NOT_WRITABLE | Internal Error: Attempted to write to a read-only chip. | ||
| -1074396996 | IMG_ERR_I2C_BUS_FAILED | Internal Error: The I2C bus did not respond correctly. | ||
| -1074396995 | IMG_ERR_DEVICE_IN_USE | The requested IMAQ device is already in use. | ||
| -1074396994 | IMG_ERR_BAD_TAP_DATALANES | The requested data lanes on a particular tap are invalid. | ||
| -1074396993 | IMG_ERR_BAD_VIDEO_GAIN | The requested video gain value is out of range. | ||
| -1074396992 | IMG_ERR_VHA_MODE_NOT_ALLOWED | The current device configuration does not allow VHA mode. | ||
| -1074396991 | IMG_ERR_BAD_TRACKING_SPEED | The color video tracking speed is invalid. | ||
| -1074396990 | IMG_ERR_BAD_COLOR_INPUT_SELECT | The selected input connector is not valid. | ||
| -1074396989 | IMG_ERR_BAD_HAV_OFFSET | The offset value for the Horizontal Active Video color decoder setting is invalid. | ||
| -1074396988 | IMG_ERR_BAD_HS1_OFFSET | The Horizontal Sync 1offset value for the color decoder is invalid. | ||
| -1074396987 | IMG_ERR_BAD_HS2_OFFSET | The Horizontal Sync 2 offset value for the color decoder is invalid. | ||
| -1074396986 | IMG_ERR_BAD_IF_CHROMA | The chroma IF compensation setting is invalid. | ||
| -1074396985 | IMG_ERR_BAD_COLOR_OUTPUT_FORMAT | The color output format is invalid. | ||
| -1074396984 | IMG_ERR_BAD_SAMSUNG_SCHCMP | The phase constant specified for the color decoder is invalid. | ||
| -1074396983 | IMG_ERR_BAD_SAMSUNG_CDLY | The chroma path group delay setting is invalid. | ||
| -1074396982 | IMG_ERR_BAD_SECAM_DETECT | The SECAM detection method is invalid. | ||
| -1074396981 | IMG_ERR_BAD_FSC_DETECT | The FSC detection method is invalid. | ||
| -1074396980 | IMG_ERR_BAD_SAMSUNG_CFTC | The chroma frequency tracking time constant is invalid. | ||
| -1074396979 | IMG_ERR_BAD_SAMSUNG_CGTC | The chroma gain tracking time constant setting is invalid. | ||
| -1074396978 | IMG_ERR_BAD_SAMSUNG_SAMPLE_RATE | The pixel sampling rate is invalid. | ||
| -1074396977 | IMG_ERR_BAD_SAMSUNG_VSYNC_EDGE | The requested VSYNC edge to synchronize with is invalid. | ||
| -1074396976 | IMG_ERR_SAMSUNG_LUMA_GAIN_CTRL | The method used to control the gain setting for luminance is invalid. | ||
| -1074396975 | IMG_ERR_BAD_SET_COMB_COEF | The chrominance comb coefficients setting is invalid. | ||
| -1074396974 | IMG_ERR_SAMSUNG_CHROMA_TRACK | The method used to track chrominance is invalid. | ||
| -1074396973 | IMG_ERR_SAMSUNG_DROP_LINES | The algorithm for dropping video lines is invalid. | ||
| -1074396972 | IMG_ERR_VHA_OPTIMIZATION_NOT_ALLOWED | VHA optimization is not applicable for the current configuration. | ||
| -1074396971 | IMG_ERR_BAD_PG_TRANSITION | A pattern generation is invalid. | ||
| -1074396970 | IMG_ERR_TOO_MANY_PG_TRANSITIONS | The number of pattern generation transitions exceeds the maximum allowed for the selected IMAQ device. | ||
| -1074396969 | IMG_ERR_BAD_CL_DATA_CONFIG | The data configuration for the channel link chip is invalid. | ||
| -1074396968 | IMG_ERR_BAD_OCCURRENCE | The requested occurrence is invalid. | ||
| -1074396967 | IMG_ERR_BAD_PG_MODE | The pattern generation mode is invalid. | ||
| -1074396966 | IMG_ERR_BAD_PG_SOURCE | The pattern generation source signal is invalid. | ||
| -1074396965 | IMG_ERR_BAD_PG_GATE | The pattern generation gate signal is invalid. | ||
| -1074396964 | IMG_ERR_BAD_PG_GATE_POLARITY | The pattern generation gate polarity is invalid. | ||
| -1074396963 | IMG_ERR_BAD_PG_WAVEFORM_INITIAL_STATE | The initial state for the pattern generation waveform is invalid. | ||
| -1074396962 | IMG_ERR_INVALID_CAMERA_ATTRIBUTE | The requested camera attribute is invalid. | ||
| -1074396961 | IMG_ERR_BOARD_CLOSED | The request failed because the device is closed. | ||
| -1074396960 | IMG_ERR_FILE_NOT_FOUND | The requested file could not be found. | ||
| -1074396959 | IMG_ERR_BAD_1409_DSP_FILE | The dspfilter1409.bin file is corrupt or missing. | ||
| -1074396958 | IMG_ERR_BAD_SCARABXCV200_32_FILE | The scarabXCV200.bin file is corrupt or missing. | ||
| -1074396957 | IMG_ERR_BAD_SCARABXCV200_16_FILE | The scarab16bit.bin file is corrupt or missing. | ||
| -1074396956 | IMG_ERR_BAD_CAMERA_LINK_FILE | The data1428.bin file is corrupt or missing. | ||
| -1074396955 | IMG_ERR_BAD_1411_CSC_FILE | The colorspace.bin file is corrupt or missing. | ||
| -1074396954 | IMG_ERR_BAD_ERROR_CODE | The error code passed into imgShowError is unknown. | ||
| -1074396953 | IMG_ERR_DRIVER_TOO_OLD | The IMAQ device requires a newer version of the NI-IMAQ driver software. | ||
| -1074396952 | IMG_ERR_INSTALLATION_CORRUPT | The NI-IMAQ driver software installation is corrupt. | ||
| -1074396951 | IMG_ERR_NO_ONBOARD_MEMORY | NI-IMAQ cannot perform an onboard acquisition because there is no onboard memory. | ||
| -1074396950 | IMG_ERR_BAD_BAYER_PATTERN | The Bayer pattern specified is invalid. | ||
| -1074396949 | IMG_ERR_CANNOT_INITIALIZE_BOARD | The IMAQ device is not operating correctly and cannot be initialized. | ||
| -1074396948 | IMG_ERR_CALIBRATION_DATA_CORRUPT | The stored calibration data has been corrupted. | ||
| -1074396947 | IMG_ERR_DRIVER_FAULT | NI-IMAQ attempted to perform an illegal operation. | ||
| -1074396946 | IMG_ERR_ADDRESS_OUT_OF_RANGE | NI-IMAQ attempted to access a chip beyond the applicable addressable range. | ||
| -1074396945 | IMG_ERR_ONBOARD_ACQUISITION | The requested operation is not valid for onboard acquisitions. | ||
| -1074396944 | IMG_ERR_NOT_AN_ONBOARD_ACQUISITION | The requested operation is valid only for onboard acquisitions. | ||
| -1074396943 | IMG_ERR_BOARD_ALREADY_INITIALIZED | NI-IMAQ attempted to call an initialization function on an IMAQ device that was already initialized. | ||
| -1074396942 | IMG_ERR_NO_SERIAL_PORT | The IMAQ device does not have a serial port. Serial functions are invalid. | ||
| -1074396941 | IMG_ERR_BAD_VENABLE_GATING_MODE | The VENABLE gating mode selection is invalid. | ||
| -1074396940 | IMG_ERR_BAD_1407_LUT_FILE | The lutfpga1407.bin file is corrupt or missing. | ||
| -1074396939 | IMG_ERR_BAD_SYNC_DETECT_LEVEL | The synchronization signal detection level is out of range. | ||
| -1074396938 | IMG_ERR_BAD_1405_GAIN_FILE | The gain1405.bin file is corrupt or missing. | ||
| -1074396937 | IMG_ERR_CLAMP_DAC_NOT_PRESENT | The IMAQ device does not have a clamp DAC. | ||
| -1074396936 | IMG_ERR_GAIN_DAC_NOT_PRESENT | The IMAQ device does not have a gain DAC. | ||
| -1074396935 | IMG_ERR_REF_DAC_NOT_PRESENT | The IMAQ device does not have a reference DAC. | ||
| -1074396934 | IMG_ERR_BAD_SCARABXC2S200_FILE | The scarabXC2S200.bin file is corrupt or missing. | ||
| -1074396933 | IMG_ERR_BAD_LUT_GAIN | The specified LUT gain is invalid. | ||
| -1074396932 | IMG_ERR_BAD_MAX_BUF_LIST_ITER | The requested number of buffer lists for an onboard acquisition is invalid. | ||
| -1074396931 | IMG_ERR_BAD_PG_LINE_NUM | The requested line number for pattern generation is invalid. | ||
| -1074396930 | IMG_ERR_BAD_BITS_PER_PIXEL | The requested number of bits per pixel is invalid. | ||
| -1074396929 | IMG_ERR_TRIGGER_ALARM | Triggers are coming in too fast to handle them and maintain system responsiveness. Check for noise on your trigger line. | ||
| -1074396928 | IMG_ERR_BAD_SCARABXC2S200_03052009_FILE | The scarabXC2S200_03052009.bin file is corrupt or missing. | ||
| -1074396927 | IMG_ERR_LUT_CONFIG | Internal Error: An error occurred while configuring the LUT. | ||
| -1074396926 | IMG_ERR_CONTROL_FPGA_REQUIRES_NEWER_DRIV | A firmware update has been applied to the device. The IMAQ device requires a newer version of the NI-IMAQ driver software to work with the update. | ||
| -1074396925 | IMG_ERR_CONTROL_FPGA_PROGRAMMING_FAILED | An error occurred while updating the firmware on the device. | ||
| -1074396924 | IMG_ERR_BAD_TRIGGER_SIGNAL_LEVEL | The trigger line does not support the requested signaling level. | ||
| -1074396923 | IMG_ERR_CAMERA_FILE_REQUIRES_NEWER_DRIVER | This camera file requires a newer version of NI-IMAQ. | ||
| -1074396922 | IMG_ERR_DUPLICATED_BUFFER | An image cannot be placed in the same buffer list more than once. | ||
| -1074396921 | IMG_ERR_NO_ERROR | No error | ||
| -1074396920 | IMG_ERR_INTERFACE_NOT_SUPPORTED | The camera file does not support the current interface type. | ||
| -1074396919 | IMG_ERR_BAD_PCLK_POLARITY | The requested polarity for the pixel clock is invalid. | ||
| -1074396918 | IMG_ERR_BAD_ENABLE_POLARITY | The requested polarity for the enable line is invalid. | ||
| -1074396917 | IMG_ERR_BAD_PCLK_SIGNAL_LEVEL | The requested signaling level for the pixel clock is invalid. | ||
| -1074396916 | IMG_ERR_BAD_ENABLE_SIGNAL_LEVEL | The requested signaling level for the enable line is invalid. | ||
| -1074396915 | IMG_ERR_BAD_DATA_SIGNAL_LEVEL | The requested signaling level for the data lines is invalid. | ||
| -1074396914 | IMG_ERR_BAD_CTRL_SIGNAL_LEVEL | The requested signaling level for the control lines is invalid. | ||
| -1074396913 | IMG_ERR_BAD_WINDOW_HANDLE | The requested window handle is invalid. | ||
| -1074396912 | IMG_ERR_CANNOT_WRITE_FILE | Cannot open the requested file for writing. | ||
| -1074396911 | IMG_ERR_CANNOT_READ_FILE | Cannot open the requested file for reading. | ||
| -1074396910 | IMG_ERR_BAD_SIGNAL_TYPE | Cannot wait on the requested signal. | ||
| -1074396909 | IMG_ERR_BAD_SAMPLES_PER_LINE | The specified number of samples per line is invalid. | ||
| -1074396908 | IMG_ERR_BAD_SAMPLES_PER_LINE_REF | The specified reference value for samples per line is invalid. | ||
| -1074396907 | IMG_ERR_USE_EXTERNAL_HSYNC | The current video signal requires an external HSYNC to be used to lock the signal. | ||
| -1074396906 | IMG_ERR_BUFFER_NOT_ALIGNED | An image buffer is not properly aligned. All image buffers must be aligned to a DWORD boundary. | ||
| -1074396905 | IMG_ERR_ROWPIXELS_TOO_SMALL | The number of pixels per row is less than the region of interest width. | ||
| -1074396904 | IMG_ERR_ROWPIXELS_NOT_ALIGNED | The number of pixels per row is not properly aligned. The total number of bytes per row must be aligned to a DWORD boundary. | ||
| -1074396903 | IMG_ERR_ROI_WIDTH_NOT_ALIGNED | The ROI width is not properly aligned. The total number of bytes bounded by the ROI width must be aligned to a DWORD boundary. | ||
| -1074396902 | IMG_ERR_LINESCAN_NOT_ALLOWED | Linescan mode is not valid for this tap configuration. | ||
| -1074396901 | IMG_ERR_INTERFACE_FILE_REQUIRES_NEWER_DRIV | This interface file requires a newer version of NI-IMAQ. | ||
| -1074396900 | IMG_ERR_BAD_SKIP_COUNT | The requested skip count value is out of range. | ||
| -1074396899 | IMG_ERR_BAD_NUM_X_ZONES | The number of X zones in the tap configuration of the camera is invalid. | ||
| -1074396898 | IMG_ERR_BAD_NUM_Y_ZONES | The number of Y zones in the tap configuration of the camera is invalid. | ||
| -1074396897 | IMG_ERR_BAD_NUM_TAPS_PER_X_ZONE | The number of taps per X zone in the tap configuration of the camera is invalid. | ||
| -1074396896 | IMG_ERR_BAD_NUM_TAPS_PER_Y_ZONE | The number of taps per Y zone in the tap configuration of the camera is invalid. | ||
| -1074396895 | IMG_ERR_BAD_TEST_IMAGE_TYPE | The requested test image type is invalid. | ||
| -1074396894 | IMG_ERR_CANNOT_ACQUIRE_FROM_CAMERA | This firmware is not capable of acquiring from a camera. | ||
| -1074396893 | IMG_ERR_BAD_CTRL_LINE_SOURCE | The source for the camera control line is invalid. | ||
| -1074396892 | IMG_ERR_BAD_PIXEL_EXTRACTOR | The requested pixel extractor is invalid. | ||
| -1074396891 | IMG_ERR_BAD_NUM_TIME_SLOTS | The requested number of time slots is invalid. | ||
| -1074396890 | IMG_ERR_BAD_PLL_VCO_DIVIDER | The requested VCO divide down number is invalid. The only valid values are 2, 4, 8 and 16. | ||
| -1074396889 | IMG_ERR_CRITICAL_TEMP | The device temperature exceeded the critical temperature threshold. | ||
| -1074396888 | IMG_ERR_BAD_DPA_OFFSET | The requested dynamic phase aligner offset is invalid. | ||
| -1074396887 | IMG_ERR_BAD_NUM_POST_TRIGGER_BUFFERS | The requested number of post trigger buffers is invalid. | ||
| -1074396886 | IMG_ERR_BAD_DVAL_MODE | The requested DVAL mode is invalid. | ||
